Varna Pest Control Blog

You can protect your car against rats invading your car engine bay by installing Varna Ultrasonic Rat Repellent. It does not interfere with any of your engine wiring or accessories.

Place the repeller facing the hood and fix it using plastic tags and frame. The ultrasonic sound will bounce back evenly when faced opposite the hood.

Connect Red wire to Positive terminal and Black wire to negative terminal. The unit will start functioning.

For initial days, you have to stick the metallic sheet provided in the package to the hood when there is heat and sound absorbing pad is within the hood. This will help to reflect 100% ultrasonic sound throughout the engine bay.

Within 1 -2 weeks, rats will stop coming to your car.

If rat enters your Ford Fiesta Car engine bay and destroys your cables, you can easily install Varna Ultrasonic Rat Repellent following the instructions below.

Fix the repellent facing the bonnet firmly using plastic tags. Let there be enough clearance when the hood is in closed position.

The red wire to be connected to the positive terminal and black wire to the negative terminal. The unit will start functioning. You can notice the desired results within 1-2 weeks.

Fix the Varna Rat Repellent within the engine area facing towards the bonnet.

Using plastic tags to tightly tie the repellent.

Connect red wire clip to Positive and black wire to Negative terminal of the battery. The unit will start working, you will not hear any sound as it is in ultrasonic mode. You can press “TEST” button for audible mode, you will hear a noise.

You will get see desired results within 1 – 2 weeks, the rats will gradually stop visiting your car engine bay.

Fix the Varna Rat repellent facing towards the bonnet, using plastic tags.

Please make sure the repellent is firm and not shaking.

Fix the red clip to positive terminal of the battery and black wire to be clipped to negative terminal. The unit will start functioning.

Paste the aluminium sticker opposite side of the repellent to reflect the sound throughout the engine area. This is required only if you have heat absorbing black foam pad.

Within a week you will see reduction in rat activity.