Archive for August, 2014

Rat Problem in Tata Safari – Install Varna Suraksha Repellent (Pictures)

Monday, August 25th, 2014

Easy step by step to install Varna Rat Repellent to repel rats entering your Tata Safari engine bay. (Click to enlarge pictures)

safari01

Fix the repellent facing the bonnet hood using plastic tags.

safari00

Connect red wire and black wire to Positive and Negative terminal of the battery.

safari02

Paste the aluminium foil within the hood to reflect the ultrasonic sound efficiently.

safari04You can notice the desired results within a weeks time.

 

Rat in Chevrolet Enjoy – Installation Pictures of Varna Ultrasonic Repellent

Thursday, August 21st, 2014

If rat is entering your Chevrolet Enjoy car engine bay and damaging your wires and accessories, install Varna Suraksha Rat Repellent following simple step by step process.

enjoyOpen the car bonnet, and place the repellent within the engine bay. Please note, the rat enters the car through wheel well and creates problem, so you should protect the complete engine bay with ultrasonic repellent.


enjoy-chev01Place repellent in the right hand side, please note, there should be atleast 10 inch of clearance between hood and the repellent to bounce back the ultrasonic sound.

enjoy-chev02

 

Use plastic tags to tie the unit.

enjoy-chev04

Connect red wire to Positive terminal and black wire to negative terminal of the battery. The unit will start working, Red light will flicker and you can hear beep sound when you press TEST button.

enjoy-chev05

Stick aluminium foil just opposite the repellent to bounce back the ultrasonic sound to other side of the engine bay. If black insulation foam is not present within your hood, this process is not required.

Rat Problem in Hyundai Santro? – Install Varna Ultrasonic Repellent

Wednesday, August 20th, 2014

Install Varna Ultrasonic Rat repellent to repel rats permanently from your Santro Car. Simple step by step to fix the repellent –

santro01

Fix the repeller within the bonnet area (facing upwards) where there is enough space to re-bounce the ultrasonic side to other side of the car. Here it is done at the left hand side. Use the plastic tags to tie the unit. (Click to enlarge the picture)

santro03Connect the red and black wire to positive and negative terminal respectively.

santro02

The repellent is ready and working. You will see red light flickering and hear beep sound when you press the “Test” button.

 

 

Choose Your Car Model – Varna Rat Repellent Installation

Wednesday, August 6th, 2014

Please click the below models to see visual pictures to install “Varna Suraksha Rat Repellent – Auto Model”

repeller

Tata Indigo – Varna Rat Repellent Installation Pictures

Wednesday, August 6th, 2014

Simple step by step Varna Rat Repellent installation to repel rats creating problem in Tata Indigo car. (click to enlarge pictures)indigo01

Fix the repeller facing the bonnet using plastic tag. Connect the Red wire to the positive and Black wire to negative terminal.

indigo02

 

Stick aluminium sticker to the bonnet just opposite the repeller. Please ignore this step if you don’t have heat insulation pad within the hood.

 

 

 

Chevrolet – Varna Rat Repellent Installation Pictures

Wednesday, August 6th, 2014

The Varna rat repellent has to be fixed within the Chevrolet engine bay, facing towards the hood. The repellent speaker should be slightly tilted towards the left to reflect the ultrasonic frequency throughout the engine bay.

Copy-of-DSCF2401

Connect the repellent wires to the battery terminals.

chev

If the bonnet has heat insulation pad within, paste the aluminium sticker just opposite the repellent to re-bounce the ultrasonic sound throughout the engine bay.

Copy-of-DSCF2400

 

 

Hyundai i10 – Varna Rat Repellent Installation Pictures

Wednesday, August 6th, 2014

The Varna rat repellent has to be fixed within the Hyundai i10 engine bay, facing towards the hood. The repellent speaker should be slightly tilted towards the left to reflect the ultrasonic frequency throughout the engine bay.

i10-repellent02

Connect the repellent wires to the battery terminals.

i10-repellent01

If the bonnet has heat insulation pad within, paste the aluminium sticker just opposite the repellent to re-bounce the ultrasonic sound throughout the engine bay.

i10-repellent03

 

Renault Duster Rat Problem – Varna Repeller Installation Pictures.

Wednesday, August 6th, 2014

Simple and permanent method to repel any rats entering your Renault Duster engine bay. (click to enlarge pictures)

duster2

Fix the repeller facing the bonnet using plastic tag.

duster

Connect the red wire to the positive + terminal and connect the black wire to negative terminal.

duster3

Paste the aluminum sticker to the bonnet hood just opposite to reflect the ultrasonic sound throughout the engine bay. Face the repeller speaker directly to the aluminium sticker.

Maruti Ertiga – Varna Rat Repellent Installation Pictures

Wednesday, August 6th, 2014

Simple step by step Varna Rat Repellent installation to repel rats creating problem in Ertiga car. (click to enlarge pictures)

ertiga03

 

Fix the repeller facing the bonnet using plastic tag.
ertiga01Connect the Red wire to the positive and Black wire to negative terminal

ertiga02

Stick aluminium sticker to the bonnet just opposite the repeller. Please ignore this step if you don’t have heat insulation pad within the hood.