Archive for July, 2014

Volkswagen Polo – Varna Rat Repellent Installation Pictures

Thursday, July 31st, 2014

Fix the Varna Rat Repeller facing speaker towards the bonnet hood with the help of plastic tag and supporter provided.

polo01

Tilt speaker to 45 degree to reflect ultrasonic sound to other side of engine bay.

polo02

Connect the repellent wire to the battery terminals (Red wire to Positive, black to Negative terminal)

Stick the aluminium sticker to the bonnet hood in the direction to reflect ultrasonic sound throughout the engine bay.  Please ignore this step if you don’t have heat insulation pad within the hood.

sticker

Ford Figo – Ultrasonic Rat Repeller Installation Pictures

Thursday, July 31st, 2014

Fix the repeller facing speaker towards the bonnet hood.

figo-rat-02

Connect the repellent wire to the battery terminals as shown in the below figure.

figo-rat-01

Stick aluminium foil on the heat insulation pad to reflect 100% of ultrasonic sound throughout the engine bay. Please ignore this step if you don’t have heat insulation pad within the hood.

figo-rat-03

Repel rats in Honda Brio – Varna Ultrasonic Repeller Installation

Thursday, July 31st, 2014

Simple steps to install Varna Ultrasonic Rat repeller to Honda Brio car –

brio03Click to enlarge.

Fix the repeller within the engine, facing the speaker upwards in the shown angle. The ultrasonic sound should hit the bonnet and reflect the sound throughout the engine bay.

brio01

Connect the red and black wire to + positive and -negative terminal of the battery respectively.

brio02

Paste the aluminium sticker to the hood directly opposite to the repellent speaker to reflect the ultrasonic sound to the other side of the engine bay.

aluminium

Double Varna Rat Repeller Installed in XUV

Friday, July 25th, 2014

Installation of 2 Varna Suraksha Rat Repeller for XUV.

If you can notice the engine is covered with a hard plastic layer which almost touching (just 1 inch gap) the hood when it is closed. This blocks the ultrasonic sound from the repeller installed on right hand side to travel the left side of the engine. So, we have fixed another repeller on the left hand side for better distribution throughout the engine bay. The same has to be done to SKODA cars also, as SKODA cars engine area is very compact.

 

xuv-rat01

Click to enlarge

Both the repellers has to be connected to the battery terminals.

Focus the repeller to the middle part of the bonnet lid. Please stick the aluminium sticker within the bonnet hood towards the repeller sticker.

xuv-rat02

 

 

Fix another repeller to the left side and focus towards the middle part of the bonnet.
xuv-rat03

 

This will help to completely protect your car engine bay from intruding rats.

Rat in Audi Engine – Varna Repeller Installation Pictures

Thursday, July 24th, 2014

Simple technology to repel any rats entering your Audi engine bay.

Easy step by step to fix Varna Suraksha Ultrasonic Repeller in Audi car –

audi-rat-repeller0
Click to enlarge.

Fix the repeller on the right side of the engine bay. We provide plastic tags and a supporter to hold the repeller.

audi-rat-repeller01

Connect the red wire to the positive + terminal and connect the black wire (-) to the BOLT (it is for earthing purpose)

audi-rat-repeller02.

Paste the aluminum sticker to the bonnet hood just opposite to reflect the ultrasonic sound throughout the engine bay. Face the repeller speaker directly to the aluminium sticker.

audi3

 

Hyundai Verna Rat Problem – Varna Repeller Installation

Friday, July 18th, 2014

If  rats are entering your car engine bay and biting wires and accessories, you can install Varna Suraksha Rat Repeller Auto model within the bonnet area and repel all rats intruding.

How to install Ultrasonic Rat Repeller?

Fix the repeller (using plastic tag)  facing speaker towards the bonnet hood.

Copy-of-DSCF2032

Click to enlarge

Copy-of-DSCF2029

Connect the repellent wire to the battery terminals.

Copy-of-DSCF2033

Stick aluminium foil on the heat insulation pad to reflect 100% of ultrasonic sound throughout the engine bay. Please ignore this step if you don’t have heat insulation pad within the hood.


Copy-of-DSCF2032Press “TEST” button to test the repeller. You will hear beeping sound. All done.

 

Hyundai EON – Varna Rat Repellent Installation

Tuesday, July 8th, 2014

Fix the rat repellent facing the bonnet hood.

Copy of DSCF2013

Connect the repellent wire to the battery terminals.

Copy of DSCF2012

Toyota Etios Cross – Varna Rat Repellent Installation

Tuesday, July 8th, 2014

Fix the repellent facing upwards using plastic tags. Tilt the repellent face towards the middle part of the bonnet.

Copy of DSCF2016

 

 

Copy of DSCF2014

 

Clip the repellent wires to positive and negative terminals of the battery.

Copy of DSCF2013

The bonnet has heat insulation pad within, so paste the aluminium sticker just opposite the repellent to re-bounce the ultrasonic sound throughout the engine bay. Please request aluminium sticker from Varna Suraksha.

Copy of DSCF2015

Online Store to purchase Varna Suraksha Ultrasonic Auto Rat Repellent

Installation of Rodent Master Controller & Repellent Transducer in Datacenter

Tuesday, July 8th, 2014

Easy steps to install Varna Suraksha Lxi12 or ZX20 VHFO rodent repellent system within the data-center or hub room to repel rats / mice biting cable or wire.

Place Master Controller within the electrical room or data center where 5 amp power source is available. Proper ventilation is must or temperature controlled room is better.  Stand and bracket will be provided. Master controller to be switched ON 24/7.

click to enlarge

master-controller

The cable between Master controller and Transducers (satellites) should be carefully conduited. Each transducer requires parallel connection from the master console.

technician

Please note: Transducers should be fixed in false ceiling, raised flooring and normal room as well.

Each Transducer can protect upto 300 Sq Ft. in a normal floor, 150 Sq Ft. in false ceiling and false flooring against rats. If there are any obstructions, partitions, sound absorbing material within the room, the area covered will be considerably less, additional transducers has to be installed.

How to fix and focus the Transducer in False Ceiling?

transducer-false-ceiling

transducer-false-ceiling

Transducer does not require power. Fix transducer  for every 150 sft area in false ceiling. Face the transducer focusing downwards or even side ways is also fine. (Solid surface is better for maximum bouncing of sound waves.)

Please note: Transducer can be sound tested with help of testing knob provided in the Master console. You will hear continuous beep sound.

How to fix and focus the Transducer in Raised Flooring?

transducer-raised-flooring2

transducer-raised-flooring

Focus the transducer speaker sideways for maximum coverage. Transducer to be placed for every 150 sft. area.

In the normal room where your servers are installed, you need to place transducers for every 300 sft. area. Do not face the transducers to an open window or door, the sound will escape. If there are any obstructions, partitions, sound absorbing material within the room, the area covered by transducer will be considerably less, additional transducers has to be installed.

Rat Repellent Installation at i20 Hyundai

Thursday, July 3rd, 2014

The Varna rat repellent has to be fixed within the engine bay, facing towards the hood. The repellent speaker should be slightly tilted towards the right to reflect the ultrasonic frequency throughout the engine bay.

i20

Connect the repellent wires to the battery terminals.

i20-2

The unit will function immediately. The red LED light will blink and beep sound can be heard when “TEST” button is pressed.